KERN & SOHN DLT 100-3N User Manual
Page 57
DLT_N-BA-e-1421
57
(3) Carrying Out Measurement
Step 1: Preheat
Work screen without preheating,
see chap.11.1.3
Work screen with preheating,
see chap.11.1.3
Sample display: Work screen with weighing
guide disabled, see chap: 11.1.4
The display may prompt you to close the sample
chamber.
Sample display: Work screen with weighing
guide enabled, see chap: 11.1.4
Close sample chamber, preheating will start.
The warning symbol
will be displayed for
temperatures > 50°C.
You may stop preheating during the preheating
period by tapping
.
Step 2: Determining the initial weight of a sample
Put an empty sample dish on the
sample dish holder and move it to the
sample chamber.
Tare empty sample dish.
Place sample in sample dish.
For details with enabled weighing guide,
(see chap. 11.1.4) Determine the target
weight
±tolerance as described below.