KERN & SOHN DLT 100-3N - Manual (Page 36)

36 DLT_N-BA-e-1421
10.3 Peripheral equipment

Tap <Peripheral>, see chap: 10. The available settings will be displayed.
< Printer selection > Settings:
DPP-250 Setting for KERN YKC-01
DPP-350
< Print at stability > Settings:
On Stability check before data transfer on
Off Stability check before data transfer off
<Print heading> Settings:
As headline can be defined 4
lines with 40 characters each
Off Printout header line disabled
On Printout header line enabled
Line 1 In setting <ON> tap corresponding line and
enter your text in the displayed input window,
then import by pressing <OK>.
Line 2
Line 3
Line 4
< Line feed> Settings:
Line feed at the end of the
printout.
Enter desired number in numeric input window.
<GLP> Settings:
On GLP-printout enabled
Off GLP-printout disabled
<Print time and date>
(for disabled GLP function
only)
Settings:
On Print date/time on test certificate
Off Do not print date/time on test certificate