KERN & SOHN DLT 100-3N - Manual (Page 42)

42 DLT_N-BA-e-1421
3. Gentle drying
Display pictogram during drying
This heating profile is suitable for the soft
drying of substances, which tend to skin
formation (e.g. substances containing
sugar or volatile substances). Skin
formation will then affect the evaporation
of the trapped moisture. The temperature
is permanently increased and reaches the
selected drying temperature only after
finishing the so called ramp duration. The
ramp, i.e. the period between start of
drying process and reaching the drying
temperature, can be selected.
Tap < Ramp >.
Selectable parameters:
 Drying temperature: 35°C - 160°C
 Ramp duration: 1 – 15 minutes.
Tap the respective control button, the
numeric input window will appear. Enter
required drying temperature or ramp
duration.
Import entry with <OK> , the display returns
to the previous screen.
Note:
If the drying temperature in the set ramp
duration cannot be reached, an error
message will appear. Increasing ramp
time.