KERN & SOHN DLT 100-3N - Manual (Page 61)

DLT_N-BA-e-1421 61

Step 6: End of measurement, display/printout measuring results

The end of the drying process will be indicated by an audio signal, provided this
has been enabled in the menu (menu settings <end audio signal “ON”>), see
chap. 10.1) whereupon heating will be turned off.

The displayed control buttons provide the following options:
Display of set drying parameters
Saving measurement results, see step 7.
Carrying out additional measurements with the help of the
current drying program
If an optional printer is connected, a printout of the measuring
protocol with drying graph will be issued.
If an optional printer is connected, a printout of the measuring
protocol without drying graph will be issued.