KERN & SOHN DLT 100-3N - Manual (Page 37)

DLT_N-BA-e-1421 37
10.4 Adjustment

Tap < Calibration settings > see, chap: 10. The available settings will be
displayed.
< Calibration data > View or print adjustment protocol:
< Calibration mode > Settings:
External
default
Standard
(default
setting)
Here the adjustment takes place near the
maximum load of the balance
(recommended adjustment weight see
chap. 1).
External
custom
Weights of different nominal values may
be used here for adjustment but are not
optimal for technical measuring.