KERN & SOHN DLT 100-3N - Manual (Page 35)

DLT_N-BA-e-1421 35
10.2 Balance settings

Tap <Weighing parameters>, see chap: 10. The available settings will be
displayed.
< Filter > Settings:
This menu item allows the
balance to be set according to
specific ambient conditions and
measuring purposes.
Filter 1 Setting for dosage
Filter 2 The balance reacts quickly and in a
sensitive manner, very quiet set-up
location.
Filter 3 The balance reacts slowly and in a
robust manner, busy set-up location
< Stability > Settings:
Stability 0 Very quiet setup location

Very setup location.
Stability 1
Stability 2
default setting
Stability 3
<Autozero> Settings:
Under this menu item the
automatic zero point correction
can be switched on or off. In
switched-on-state the zero point
is automatically corrected at drift
or when dirty.
Auto zero off Auto Zero switched off
Autozero 1 Auto Zero range ± ½ Digit
Autozero 2 Auto Zero range ± 3 Digits
Autozero 3 Auto Zero range ± 7 Digits
Autozero 3E Auto Zero range ± 7 digits in the
whole weighing range