KERN & SOHN DLT 100-3N - Manual (Page 24)

24 DLT_N-BA-e-1421
6.7 Call-up weighing mode

Press in table mode, “tbl mode” will be shown.

Press to confirm, “tabl on“ will be shown.

Press to select setting “tabl oFF“.

Acknowledge with . Wait until weighing mode is shown.
6.8 Connection of peripheral devices
Before connecting or disconnecting of additional devices (printer, PC) to the data
interface, always disconnect the moisture analyser from the power supply.
Only use accessories and peripheral instruments by KERN, as they are ideally tuned
to the instrument.