Figure 12-6. use of the rpc mode, Table 12-a. use of the rpc mode – Maxim Integrated Secure Microcontroller User Manual
Page 105
Secure Microcontroller User’s Guide
105 of 187
Port 2.3
WR
Input that allows the host to write data or commands to DBBIN.
Port 2.4
OBF
Output flag that indicates to a host that the output buffer is full and should be read.
Port 2.5
IBF
Output that indicates to a host that the input buffer is empty.
Port 2.6
DRQ
Output that indicates to a host that a DMA is required.
Port 2.7
DACK
Input that indicates to the DS5001 that the host has granted a DMA.
Figure 12-6. Use of the RPC Mode
Table 12-A. Use of the RPC Mode
CE
RD
WR
A0
REGISTER
0
0
1
0
Data Out
0
0
1
1
Status
0
1
0
0
Data In
0
1
0
1
Command In
1
X
X
X
No Register
P2.0/A0
P2.1/
CE
P2.2/
RD
P2.3/
WR
P2.4/OBF
P2.5/
IBF
P2.6/DRQ
P2.7/
DACK
PORT 2
CONTROL BUS
P0.0/D0
P0.1/D1
P0.2/D2
P0.3/D3
P0.4/D4
P0.5/D5
P0.6/D6
P0.7/D7
PORT 0
DATA BUS