Chaparral Fibre Channel -to-SCSI Router Chaparral FS 1310 - Manual (Page 18)

FS1310 Rack/Desktop Model User’s Guide
2-2
4 Visually inspect the router and notify your freight carrier immediately of any
damage.
5 Record the Media Access Control (MAC) address located on the label of the router
box for future reference.
Figure 2-1 below shows the front and rear panels of the FS1310.
Figure 2-1. FS1310 front and rear panels
Installing the Router
You can install the router two ways:
!
On a desktop or table
!
In a standard 1U high, 19" rack
Installing on a Desktop
To install the FS1310 on a desktop:
1 Attach the five rubber feet to the recessed locations on the bottom of the router.
2 Place the router on a table, desktop, or other flat surface.
Note: Ensure that the front and rear panels have adequate clearance for
the fan, air intake vents (front), and access to all connections.