Chaparral Fibre Channel -to-SCSI Router Chaparral FS 1310 - Manual (Page 33)

Configuring the Router
3-5
8 Press Enter.
The System Menu displays.
You can now perform all of the functions described in the following chapters. All
steps start from the System Menu.
Accessing the Network Management System
You can access the network management system software from the Router Administrator.
For more information about the settings available, see
Configuring the Additional LAN
Settings on page B-3 .
To access the network management system:
1 From the System Menu of the Router Administrator, select Configuration Menu
and press Enter.
2 Select LAN Configuration and press Enter.
The Enter Password screen displays. You can now access the network management
system screens and revise the settings as necessary.
Navigating the Router Administrator Software
You can navigate the Router Administrator software using your keyboard. Table 3-1
below describes the primary navigation and selection methods:
Table 3-1. Router Administrator navigation
To Do this
Select a menu item Press the ↑ and ↓ and press Enter.
or
Press the letter that is a different color (or
highlighted) in a menu item (hot key) and press
Enter.