Chaparral Fibre Channel -to-SCSI Router Chaparral FS 1310 - Manual (Page 46)

FS1310 Rack/Desktop Model User’s Guide
3-18
To enable or disable the alarm:
1 From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu screen displays.
2 Select Alarm and press Enter.
The Alarm screen displays. The current setting is marked with an * next to it.
3 Select the option you want and press Enter.
The system confirms that the changes are made.
4 Press Enter to return to the Configuration Menu.
Restoring the Default Settings
You can restore all of the router’s default settings. You may want to do this if the router is
not working properly and you cannot determine why. This lets you then change the
settings that are critical to your configuration, specifically the topology.
For a table of the default settings, see Router Default Settings on page 2-12 .
To restore the default settings:
1 From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu screen displays.