Chaparral Fibre Channel -to-SCSI Router Chaparral FS 1310 - Manual (Page 65)

Troubleshooting
4-3
Restoring the Default Configuration Through the
Flash Utility
You can clear the router configuration and restore all router default settings without
accessing the Router Administrator software. You may want to do this if the router is not
working properly or the system hangs after the “All diagnostic tests passed” message, as
shown on the following screen.
To restore the default configuration:
1 After powering on the system, hold down the space bar to prevent the system from
rebooting.
The Flash Utility screen displays.