Chaparral Fibre Channel -to-SCSI Router Chaparral FS 1310 - Manual (Page 81)

LAN Configuration
B-7
SNMP Configuration Screen
Option 3 from the Network Management System Console screen displays the SNMP
Configuration screen.
Table B-3 describes the settings you can change here.
Restarting the LAN Board
Option 4 from the Network Management System Console screen restarts the LAN board.
A screen will display notifying you that your system is restarting.
Table B-3. System Configuration screen settings
Option Setting Description
1 SNMP Trap Host Host computer’s IP address that is set up to receive SNMP
traps. Default is 0.0.0.0.
2 SNMP Traps
Enabled? On or off toggle to enable SNMP traps. Default is No
(disabled).
3 Read Community SNMP read password. Default is Public.
4 Write Community SNMP write password. Default is Private.
ESC Exit Saves all changes and returns to the Network Management
System Console screen
Note: After rebooting the LAN connection you can return to the Password
screen by disconnecting and reconnecting the Telnet session.