Chaparral Fibre Channel -to-SCSI Router Chaparral FS 1310 - Manual (Page 68)

FS1310 Rack/Desktop Model User’s Guide
4-6
Router is Not Responding
Problem: The router is turned on and connected, but is not working properly and its LED
lights are not lit.
Solution: Replace the fuse.
1 Insert a small flat-blade screwdriver under the tab where the fuse is located and pull
out the fuse and fuse box.
See Figure 2-9 on page 2-7 .
2 Remove the spare fuse from the box and replace the old fuse.
3 Reinstall the fuse and fuse box.
Using the Loader Diagnostics Menu
If the Power-On Self Test shows any errors, these diagnostics may help determine the
cause. Contact Chaparral technical support for assistance.
Using the Loader Utility Menu
This menu lets you perform low-level maintenance tasks. Contact Chaparral technical
support for assistance.
Event Logs
There are two different ways to view Event Logs.
To view events one at a time:
1 Select Event Log Menu from the System menu.
2 Select View Event Log from Event Log Menu.
Note: Be sure to use an F2H, 250V fuse.
Date
Event Number
Time
Type of Event