Disabling the termination on an hvd router – Chaparral Fibre Channel -to-SCSI Router Chaparral FS 1310 User Manual
Page 41
Configuring the Router
3-13
4
Select the SCSI ID (Initiator ID) you want to use for this channel and press Enter.
Depending the model you have, other screens may display.
The system confirms that you want to make the change.
5
Select Yes and press Enter to make the changes.
The system confirms that the changes are made.
6
Press Enter to return to the Configuration Menu.
Disabling the Termination on an HVD Router
You can disable the router’s termination on the HVD model only; the termination on the
LVD model cannot be disabled. You would only want to disable termination if the router is
located in the middle of a SCSI bus.
To disable the termination:
1
From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu screen displays.
2
Select Channel Configuration and press Enter.
The Channel Configuration screen displays.
3
Select the channel you want to change and press Enter.
You may need to change initiator IDs depending on the requirements of the device.
4
Select Termination and press Enter.
The Termination screen displays.
5
Select OFF and press Enter.
The system confirms that you want to make the change.
6
Select Yes and press Enter to turn termination off.
The system confirms that the change is made.
7
Press Enter to return to the Configuration Menu.