Chaparral Fibre Channel -to-SCSI Router Chaparral FS 1310 - Manual (Page 69)

Troubleshooting
4-7
3 Use the ↑ and ↓ keys to browse through the list of events.
To view a whole screen of events at once follow these steps:
1 Type Ctrl-e to switch screens until the Event Log screen appears (the text “Event
Log” is located in the lower left corner of the screen).
2 Use this screen to view multiple events simultaneously.
The ↑ and ↓ keys allow you to scroll.
u moves the screen up a page.
d moves the screen down a page.
e moves to the last event at the end of the list.
h moves to the first event at the beginning of the list.
p dumps the entire Event Log to the screen. This is used for capturing an Event Log
file (see below).
Event Log File Capture
To capture the Event Log File follow these steps (Hyperterm is used as an example
terminal):
1 With Hyperterm up and running as your RS-232 interface terminal, press Ctrl-e until
Event Log is displays.
2 Select Transfer from the menu bar at the top.
3 Select Capture Text.
4 Enter the path and file name.
5 Select Start.
6 Press p on the keyboard and to begin the capture.
7 Select Transfer from the menu bar at the top.
8 Select Capture Text.
9 Select Stop.
Your file can now be attached to an e-mail message to be sent to customer support.
Note: Event numbers restart at 000 after 999 events have been logged.