Cingular X-C 6250 Pro (300) - Manual (Page 108)

108
X-C 6250 Pro (300) NT User’s Manual
79-0030-001 11 January 2001
I/O Ports Make sure the video, serial, and parallel ports are operating
properly. Periodically inspect the ports for damage or contamination,
and make sure the cover is attached to the computer. The I/O cover can
be replaced without returning the unit for service. Contact your local
support person for more information.
PC Card Door and Connector Whenever possible, make sure this door
is closed and latched properly. When the PC Card door is closed, it
provides a watertight seal for the PC Card socket. Shield the area from
all contaminants such as liquids, rain, snow, and dust when the door is
open.
If the door needs to be replaced, this can be done without returning the
unit for service. Contact your local support person for more information.
Make sure the PC Card connector is operating properly by reading from
or writing to a PC Card.
Battery and Battery Well The battery well is not sealed, so it is
possible for moisture to enter this area. If this happens, remove the
battery and use a clean, dry cloth to wipe away any moisture from the
battery well. Also remove any moisture from the battery and battery
connectors. The connectors may corrode if they are exposed to moisture
for extended periods. Corrosion can be removed with a cotton swab
dipped in isopropyl alcohol.
Cradle Contacts The cradle contacts on the bottom of the computer
may get dirty with daily use. Pins can be cleaned with a cotton swab
dipped in isopropyl alcohol.