Cingular X-C 6250 Pro (300) - Manual (Page 113)

113
Appendix A. Error Messages
79-0030-001 11 January 2001
-Disk not found
-FATAL: CMOS RAM test failed
-FATAL: DMA controller faulty
-FATAL: Faulty DMA page registers
-FATAL: Faulty refresh circuit
-FATAL: Interrupt controller failed
-FATAL: No RAM found
-FATAL: No video display found
-FATAL: RAM error at location xxxxxx: Wrote: xx Read: xx
-FATAL: ROM checksum incorrect
Restart the computer by pressing both mouse buttons for at least 10
seconds and then releasing the buttons. If the problem persists, contact
your supervisor or your organization’s help desk.
Fixed disk controller failure
Disk controller is not responding. Report this error to your supervisor or
your organization’s help desk.
Fixed disk failure
Report this error to your supervisor or your organization’s help desk.
Gate A20 failure
Hardware failure. Report this error to your supervisor or your
organization’s help desk.
-Hard disk boot sector invalid
-Hard disk failed
Restart the computer by pressing both mouse buttons for at least 10
seconds and then releasing the buttons. If the problem persists, contact
your organization’s help desk.