Cingular X-C 6250 Pro (300) - Manual (Page 122)

122
X-C 6250 Pro (300) NT User’s Manual
79-0030-001 11 January 2001
Applications
My application locks up, acts strangely, or produces an NT blue
screen (crash screen for monochrome displays)
•
If you’ve tried to resolve the problem other ways and your application
still doesn’t respond, you may need to restart your computer as
described below.
Reset the computer by holding down both mouse buttons for at least
10 seconds and then releasing the buttons.
•
The data on the hard disk could be corrupted. NT will run
CHECKDISK.
•
Windows is out of memory/resources. Exit Windows and restart
Windows.
•
If you are using a communications application, make sure that the
Interrupt Request lines (IRQ) for COM4, specified for Windows,
match the IRQ lines specified in the SCU. See Section 5,
“Customizing Settings,” to view and change IRQ settings.
CAUTION Restarting your computer may corrupt files or data.