Cingular X-C 6250 Pro (300) - Manual (Page 137)

137
Appendix B. Troubleshooting
79-0030-001 11 January 2001
PC Cards
The system does not recognize the PC Card CD-ROM when it is
inserted into the PC Card socket
•
From the Start Menu, select Shutdown, and then Shutdown the
computer. Plug in the PC card and then restart the computer.
•
Drivers may not be installed. Contact your organization’s help desk
for assistance.
The computer locks up when I remove the PC card
•
Before you remove the card, right-click the card wizard icon in the
system “tray” area of the screen (near the clock in the lower right
corner), and choose Stop “card name” or shut down the computer
and remove the card.
I can’t turn off the computer after booting from a PC Card
•
Do not use FN+OFF to suspend the computer if you have booted
from a PC Card rather than the internal hard disk. Instead, remove
the card and then press CTRL+ALT+DEL to restart the system.
•
The card drivers may not allow suspend on NT. Shut down the
computer to save battery life.
The Megahertz Ethernet PC card does not work
•
This card has two connectors, XJACK and Honda. Use the Honda
connector.