Cingular X-C 6250 Pro (300) - Manual (Page 52)

52
X-C 6250 Pro (300) NT User’s Manual
79-0030-001 11 January 2001
Wireless LAN
Your Cisco Aironet 340 WLAN PC card is integrated in your X-C 6250
Pro (300) computer and can achieve performance, throughput and
security comparable with wired Ethernet connections. Once installed,
you do not need to do anything to turn the WLAN on since it is always
on.
To restart the WLAN card:
1 Verify that the unit is not shutdown or suspended. If the Radio LED
(on the right) is not on and there is no PCMICA card icon in the
tasktray, then the card has been deactivated.
2 Perform a Supsend/Resume. This may be done from the Start menu
or by depressing FN+OFF on the keyboard. Wait about 10 seconds
for the screen to turn black, then depress FN+ON and wait until the
display comes on. Verify that the Radio LED is illuminated and a
PCMCIA icon is displayed in the tasktray.
To install WLAN Utilities:
1 Click Start, Programs, Radio Tools, then select Install WLAN Utilities.
2 Follow the on-screen instructions.
Additional Information
For more information about WLAN see the WLAN User’s Guide, located
on your computer in Adobe Acrobat format or see the Itronix Technical
Bulletin, Itronix X-C 6250 Pro (300) Cisco Wireless Local Area Network
(WLAN).
Note If you have the Cisco utilities installed and have any of them
open when you Suspend, or if your computer goes into inactivity
suspend/resume, you will get a message from the Cisco Utilities/
Diagnostics “340 Series Removed at [time]” - where time is the
current time at the removal from service. This is normal. The
wireless connection will still work. Click OK and restart your
diagnostic utilities.