Cingular X-C 6250 Pro (300) - Manual (Page 144)

144
X-C 6250 Pro (300) NT User’s Manual
79-0030-001 11 January 2001
port An interface between the computer and external devices.
Power On Self Test (POST) A diagnostic test run by the computer’s
BIOS system when the computer restarts.
power port A port used to connect the external power supply to the
mobile computer.
radio on/off light The right-most light on the indicator panel. If your
computer is equipped with a radio modem, this light turns on when
the radio modem is powered on.
Random Access Memory (RAM) The computer’s primary working
memory in which program instructions and data are stored so they
are accessible directly to the central processing unit (CPU).
RJ-11 connector A port used by the internal modem to communicate
over standard voice grade telephone lines.
ruggedized The unique design of mobile computers that are built to
withstand rugged and rough environments.
serial port A port that can be used to connect a printer or modem.
slow charge A method of increasing the battery capacity while the
computer is attached to external power. This method uses lower AC
voltage. It takes approximately 16 hours to fully charge the battery
using this method.
software System, utility, or application programs expressed in a
computer-readable language. Software programs tell the hardware
components what to do.
speaker Located on the bottom of the computer, the speaker provides
sound for the unit.
stand alone charger An optional charging device used to charge an
additional battery for the computer.
Super Video Graphics Array (SVGA) Video graphics technology that
supports a graphics resolution of 800x600 pixels.