Cingular X-C 6250 Pro (300) - Manual (Page 36)

36
X-C 6250 Pro (300) NT User’s Manual
79-0030-001 11 January 2001
Introduction
This section includes procedures for setting up and using your
computer for the first time.
PRECAUTIONS
Please be aware of the following important information before you
begin operating your computer.
• Data stored on floppy disks may be corrupted if the disks come in
close contact with the magnetic components of the computer. Do
not lay a floppy disk on top of or under the computer.
• The internal components of the computer will be damaged if
exposed to contaminants. When dust covers, the PC card door, or
the battery door on the computer are open, shield the unit from all
contaminants such as liquids, rain, snow, and dust.
• You can lose data if you remove the battery while the computer is
operating on battery power. Turn off the unit by pressing FN+OFF
before you remove the battery. You can also lose data if the battery
is removed for more than 5 minutes.
• CAUTION If you have a touch screen:
-Always use an approved stylus.
-Never use sharp, hard, or abrasive implements on the touch screen
such as ball point pens, pencils, or keys. They could damage the
screen.
•
WARNING The computer is powered by a rechargeable Nickel
Metal Hydride (NiMH) battery. Disposing of this battery improperly
can cause serious personal injury. Do not crush the battery or place
it in a fire. The battery is recyclable and, under various state and
local laws, it may be illegal to dispose of the battery into the
municipal waste stream. Check with your local solid-waste officials
for details on recycling options or proper disposal.