Cingular X-C 6250 Pro (300) - Manual (Page 46)

46
X-C 6250 Pro (300) NT User’s Manual
79-0030-001 11 January 2001
To install your GSM software, do the following:
1 Go to Start, Radio Tools, then click on Install GSM.
2 Click OK when the install dialogue box asks for the file rasdd.dll.
Point it to c:\i386, and click OK again.
To install or replace a SIM card, do the following:
1 Shut down the computer and disconnect external power.
2 Open the battery door and remove the battery.
3 Open the SIM door with a Philips head screwdriver and install your
SIM Card by sliding the card into the cover.
4 Re-install the SIM door, the battery and the battery door.
Wireless LAN (WLAN)
Your WLAN provides location-independent network access and
connectivity within your WLAN coverage area. It is assumed that in
most cases your Information Systems (IS) Department will have
performed the necessary equipment setup and configuration required.
Generally when you start the computer and it boots into Windows, you
may be presented with a network Login Window requiring user ID and
password. If the comptuer has not been setup, please contact your
local help desk or system administrator for further assistance.
If the Wireless LAN option is installed, it will always stay on in the XC-
NT Tray Utility.
Note Unused WLAN adapters may be listed in the Control Panel
Network component list. These unused WLAN adapters have no
negative functional impact to the system. If you have a Lucent
WLAN, do not delete the unused Cisco WLAN adapter. You will
need this to set up tools (Internet Connection Sharing), allowing you
to get an IP address.