Cingular X-C 6250 Pro (300) - Manual (Page 57)

57
Section 5. Customizing Settings
79-0030-001 11 January 2001
Accessing the SCU
To access the System Configuration Utility
1 From the Start Menu, select Shut Down and then choose “Restart
the computer.”
2 Read the text on the screen while the computer is restarting and
press CTRL+ALT+S as soon as the following line appears:
“<CTRL+ALT+S> to enter System Configuration Utility.”
3 Follow the instructions at the bottom of the screen to move around in
this utility and change the items you want to customize.
4 To exit the utility, press ALT+E (or select Exit from the menu), and
then choose the appropriate option.
This utility provides additional options in the Exit menu:
“Default Settings” loads default settings defined by the system.
“Factory Defaults” loads the settings defined at the time of
manufacture.
Note You may want to reset these parameters to their factory
defaults and then customize the settings. First write down the
existing settings in case you need to refer to them.
Note When upgrading the BIOS in the field you should use Factory
Defaults before setting user settings.