PRG Bad Boy User Manual 1.6 - Manual (Page 45)

BAD BOY ® SPOT LUMINAIRE USER MANUAL 37
Menu Details
Home Screen
The Home screen consists of several sections (referred to here as "panels") which provide status and configuration
information. Pressing the panels on the touchscreen will open the applicable sub-menus.
LAMP Panel
+ Lamp Status - displays lamp on/off status, hours, temperature and power level.
The lamp icon color indicates status of lamp: off = gray icon, on = yellow icon
(shown in example at right), error = red icon.
+ Power Level - displays current APS command: 700-1400 watt.
+ Lamp Hours - displays total lamp hours. Lamp hours are shown in green if under
threshold, yellow at 750 hours, and red at 900 hours.
It is mandatory that the
lamp be changed before 900 hours.
+ Temperature - displays luminaire head temperature. The temperature is shown
in green if under limit, yellow if close to the limit, and red if over the limit.
Press panel to open Lamp Screen .
CONFIG Panel
+ Address - displays current DMX512 address 001-470.
+ Universe - displays current Art-Net universe (alpha A-JE or numeric 0-255), if
Art-Net is present.
Press panel to open Configuration Screen .
INFO Panel
+ Run Time - displays current run time in hours:minutes format.
Press panel to open Information Screen .
TEST Panel
Press panel to open Test Screen .
COMM Panel
+ Comm - displays currently active input protocol: ETH (green), DMX (green) or
NONE (red).
Press panel to open Communication Screen .
STATUS Panel
+ Status - displays fixture status: CAL (yellow), OK (green), or ERR (red).
Press panel to open Status Screen .
Home Screen (standard)
Home Screen (CMY)