PRG Bad Boy User Manual 1.6 - Manual (Page 48)

40 BAD BOY ® SPOT LUMINAIRE USER MANUAL
Communication Screen
+ Control - displays current DMX512 control values. Values will be highlighted in
green when changing.
+ Info - displays current source (DMX512 or Art-Net/Ethernet), number of bytes in
the frame, update rate, and universe number (if Art-Net).
+ Comm Loss - configures how long to wait before the fixture fades to black upon
loss of comm data. Press COMM LOSS to bring up "Set Trigger Fade After"
option. Set to
none , 30 seconds or 60 seconds . (Also refer to "Configuring Comm
Loss Setting" on page 30.)
Press EXIT to return to Home Screen .
Status Screen
+ Mechanisms - displays mechanism status. Mechanism names will be shown in
yellow while calibrating, then change to green if okay or red if an error exists.
Press to bring up Recalibration Screen.
+ Log - displays system status log. The log entries are stored in persistent memory
and are retained through power down. Use touchscreen arrows to scroll up or
down. Press CLR to bring up Clear Log Yes/No options.
Press EXIT to return to Home Screen .
Communication Screen
Status Screen