PRG Bad Boy User Manual 1.6 - Manual (Page 61)

BAD BOY ® SPOT LUMINAIRE USER MANUAL 53
Errors
The Status menus can be used to determine if any luminaire
mechanisms are reporting errors. The Status panel at the
Home screen will report overall luminaire conditions as
follows:
+ CALIBRATION (yellow)
+ OK (green)
+ ERROR (red)
+ LOCKED (white)
Pressing the Status panel will bring up the Status screen (as
shown at right). The Status screen will indicate which specific
mechanisms, if any, have errors. It also provides a log of
systems activity. The Status panel operates as follows:
+ Mechanisms - displays mechanism status. Mechanism
names will be shown in yellow if calibrated, green if okay,
and red if an error exists. If an error exists, press the
Mechanisms panel to bring up the Recalibration screen.
Try recalibrating the mechanism(s) that is reporting the
error.
+ Log - displays system log. Use touchscreen arrows to
scroll up or down. Press CLR to bring up Clear Log Yes/
No options.
Press STATUS to
bring up Status screen
Press MECHANISMS to
bring up Recalibrate screen