PRG Bad Boy User Manual 1.6 - Manual (Page 68)

60 BAD BOY ® SPOT LUMINAIRE USER MANUAL
Troubleshooting
+ If the LumLoader application does not start up, make sure the Java library is installed.
+ Make sure the network port is active before starting the application. Sometimes it takes several seconds for the
operating system to recognize the network link.
+ Make sure there is only one instance of the LumLoader application running.
+ Wireless should be disabled on the computer.
Software Crossload
The Information menu provides a method for sending a
luminaire’s current software version to all connected luminaires.
(Luminaires can be daisy-chained via DMX512 or Ethernet.)
To initiate the software crossload, press "Crossload SW" at the
Information screen. At confirmation screen, press "Yes." If a
connected luminaire already has that software version, it will do
nothing. If it does not have the same version, it will go into the
boot screen and start updating.
Note: There should be no active control (DMX512 or Art-Net)
during the update process.
Press INFO to
bring up Info screen
Press Crossload SW to
bring up confirmation