PRG Bad Boy User Manual 1.6 - Manual (Page 53)

BAD BOY ® SPOT LUMINAIRE USER MANUAL 45
Control Channels
All Control Channel functions require that the specified DMX value be held for at least 3 seconds, followed by an
immediate change to DMX 0 (without any other DMX values in between).
Zoom tables are dependent on distance to target, so several tables are provided to allow focus zoom at different
throws.
Table 3-6: Control Channels
DMX Values
(0-255)
Function Notes
10 Recalibrate: All
12 Recalibrate: Zoom/Edge
14 Recalibrate: Color
16 Recalibrate: Gobos
18 Recalibrate: Dimmer/Strobe/Iris
19 Recalibrate: Pan/Tilt
20 Lamp: Douse
30 Lamp: Start
40 Lamp Power Limit Select: 1400W default
45 Lamp Power Limit Select: 1200W
50 Lamp Power Limit Select: 900W
55 Lamp: Override Start-Up Power Limit
Overrides default setting:
3 minute warm-up at 1200W or less.
60 Zoom Table Select: 30 ´ Throw default
62 Zoom Table Select: 50 ´ Throw
Zoom Tables maintain sharp focus on an
image throughout the zoom range. Refer to
page 50 for details.
64 Zoom Table Select: 75 ´ Throw
66 Zoom Table Select: 100 ´ Throw
68 Zoom Table Select: 300 ´ Throw
70 Zoom Table Select: 15 ´ Throw
75 Zoom Speed Select: Maintain Focus default
77 Zoom Speed Select: Move Fast
80 Gobo: Set Zero Position
Allows adjustment of the gobo wheel home
position. Refer to page 50 for details.
90 Display: Turn Backlight ON
95 Display: Turn Backlight OFF
100 Pan: Lock
102 Pan: Unlock
104 Tilt: Lock
106 Tilt: Unlock
108 Pan/Tilt: Free Motion
110 Pan/Tilt: Free Lock
112 Pan/Tilt: End Free Motion
120 Clear Logs