SmarTek Systems SVS-1 User Guide-Part B - Manual (Page 38)

Routing Each Phase to a BIU-SDLC Detector Channel
1) Click the Clear All Detector Routing Check Boxes button to clear all of the right side routing
check boxes. Click the Detector Interface field to select BIU# 1-SDLC.
2) Click each routing check box (right side check boxes) to specify which Phases will be combined
(Or’ed or And’ed) and routed to each Detector Channel.
3) Click in each Detector Channel field to specify the BIU detector channel (D01 to D16).
4) For this example, Phase-1L is routed to Detector Channel 1 (D01), Phase-6T and Phase-6R are
routed to D02.
1
1
2
3