TechniSat TechniCorder ISIO STC - Manual (Page 21)

21
5.4.1 Arrow selection method
> If is shown on the left and on the right next to the set value, you can alter this using
the left/right arrow keys.
5.4.2 Selection list
If is shown on the right next to the set value, the value can be changed using the selection
list.
> Press the OK button to open the selection list.
> Highlight the setting you want using the up/down arrow keys.
By pressing the up/down arrow keys it is possible to move the highlight from line
to line and to move upwards and downwards page by page using the page
up/down buttons.
> Confirm by pressing the OK button. The selection list closes again and the selected
setting is shown in the menu.