TechniSat TechniCorder ISIO STC - Manual (Page 45)

45
> To continue playing back the programme from this point, press the Play / Pause but-
ton again.
You are now watching the programme with a time delay to the live broadcast
(Timeshift), while the programme continues to be recorded in the background.
12.2 Timeshift function
The Timeshift function allows you to record and play back at the same time. This enables
"time-shifted" viewing .
Hence you can start watching the beginning of a recording and skip through any sections
already recorded (e.g. advertising slots). The live broadcast of the programme continues to
be recorded at the same time. (see section 10.1.3 in your operating manual).
12.3 Ending manual recording
> First select the recording to be ended by selecting the channel on which the record-
ing is running as described under section 7.4.
> Pressing the Stop button generates a query as to whether the recording should be
saved or discarded.
> Select Save to save the recording, or Discard not to save the recording, or Back
to continue with the recording.
12.4 Ending recording automatically
> After pressing the On/Standby button, a request is displayed asking what should
happen to the recording in progress.
> Select the line with the desired action.
If you have selected Cancel recording, the prompt will now appear as described
in section 10.1.1.2 of your operating manual asking you what should be done with
the recording.
If you selected the programme title or one of the specified times, the receiver will now
record the current programme in full or until the selected time and then switch to
standby. The screen will switch off immediately according to the selection.