TechniSat TechniCorder ISIO STC - Manual (Page 27)

27
The picture format on the TV will be automatically adjusted according to your selec-
tion.
> Press the OK button to accept the selection.
Selecting reception signals
At this point in the installation wizard, you can select the number of antenna cables which
are connected to the receiver and which reception types you would like to use.
> Use the up/down arrow keys to select the reception signal available to which you
wish to connect or from which you wish to disconnect.
DVB-S for digital satellite channels;
DVB-C for digital cable channels;
DVB-T for digital terrestrial channels;
> Press the OK button to open the selection window, highlight the setting you want with
the up/down arrow keys and close the window by pressing the OK button again.
> To move onto the next step of the installation, use the arrow keys to highlight the
Accept field and confirm by pressing the OK button.
Number of antenna signals (DVB-S)
In this section in the installation wizard, select how many DVB-S antenna cables are con-
nected to the receiver.