TechniSat TechniCorder ISIO STC - Manual (Page 22)

22
5.4.3 Entering numbers
> Use the numeric key pad to enter the new setting which you require if a question
mark or a numeric value is displayed.
5.4.4 Virtual keyboard
If is displayed on the right next to the set value, the value is altered using the virtual key-
board. You have three different keyboard options when using this data entry method.
You can switch the keyboard layout between the so-called QWERTY keyboard and the
alphabetic keyboard; an SMS keyboard can also be used at any time.
The functionality of the QWERTY keyboard is identical to that of the alphabetic keyboard.
They only differ in the arrangement of the various letters, numbers, characters and symbols.
>
Press the OK button to open the virtual keyboard.
The keyboard now appears in the alphabetical form.
> Press the Option button to toggle between the QWERTY keyboard and the alphabet-
ic keyboard.
You can now enter the term you want as follows.
Arrow keys : Move the highlight on the keys of the virtual keyboard.
OK : The highlighted character is added to the end of the term,
or the highlighted function is executed.
/ Yellow function key: The keyboard toggles between upper case/lower case.
/ Red function key: Pressing/holding down deletes the character in front of the
blue highlight/the whole entry.
/ Green function key: The entered term is accepted.
/ Blue function key: The keyboard switches to the alternative characters.
: Moves the blue highlight within the term.