TechniSat TechniCorder ISIO STC - Manual (Page 50)

50
1 for channel slot 1
1 , then 4 for channel slot 14
2 , then 3 , then 4 for channel slot 234
1 , then 5 , then 6 then 7 for channel slot 1567
When entering channel numbers with multiple digits, you have approx. three seconds after
pressing a key to complete the entry.
If you wish to enter a number consisting of only one, two or three digits, you can speed up
the entry procedure by keeping the key depressed a little longer on the last digit.
15.2.3 Using the Navigator (channel list)
> Press the OK button.
The channel list navigator is now displayed. In TV mode only TV channels are shown, and in
radio mode only radio channels are shown.
The channel currently selected is highlighted.
> You can now highlight the channel you want using the up/down arrow keys, the
page up/down keys and the numeric keypad.
> Press the OK button to select the highlighted channel.
15.3 Switching between TV/radio
> Use the 0 button to call up the NAV menu.
> Now you can use the up/down arrow keys to highlight the desired operating
mode TV or Radio or. Back to exit the menu again.