TechniSat TechniCorder ISIO STC - Manual (Page 47)

47
13.5 Pause / Freeze frame
> To pause playback of a recording (freeze frame), press the Pause / Play button
during playback.
> Press the Pause / Play button again to resume playback from the same location.
13.6 Fast forward / Rewind
Your DVR has fast forward/rewind functions so you can get to a specific place in a recording.
>
Press the Fast forward or Rewind button during playback.
The message “Fast forward uu” or “Rewind tt” appears.
The recording will now play in the specified direction at 4x speed.
> If you press the Fast forward or Rewind button again, the speed will increase to
16x.
The message “Fast forward uuuu” or “Rewind ttt” appears.
> If you press the Fast forward or Rewind button again, the speed will increase to
64x.
The message “Fast forward uuuu” or “Rewind tttt” appears.
> Pressing the Fast forward or Fast rewind button again causes you to jump for-
wards or backwards in 10 minute increments.
> When you get to the place you want in the recording, you can return to normal play-
ing mode by pressing the Play / Pause button.
13.7 Setting tags
> Skip as described above to a location in the recording where you want to add a tag.
> Pressing the Record button sets a tag at the selected location.
13.8 Skipping to tags
During playback you have the option of navigating directly to locations in the recording
where you have set tags.
> In
Options selection , use the Tag menu item to select the tag in order to skip to
the desired position in the recording.
13.9 Ending playback
> Press the Stop button to end playback.
Playback will end and your receiver will return to normal mode. In doing so the
receiver "notices" the place in the recording where playback ended. If you start play-
ing this recording again, it will automatically resume at the point where you previously
left off.