TechniSat TechniCorder ISIO STC - Manual (Page 7)

7
- Never open the receiver housing under any circumstances!! You risk
receiving an electric shock.
Any necessary repairs to the receiver should only
be carried out by qualified service personnel.
In the following circumstances you should disconnect the device from the mains
power and consult an expert:
>
the power cable or mains plug is damaged
> the unit has been exposed to moisture or liquid has got into it
> there are significant malfunctions
> there is severe external damage.
2.2 Periods of non-use
During a storm or lengthy period of non-use (e.g. holiday), the receiver should be discon-
nected from the mains and the antenna cable removed.
Before you disconnect the receiver from the mains, you should first switch it to standby
mode and wait until the time appears in the display or the red LED light is displayed.
2.3 Important notes on operation
Operation of the digital receiver is simplified through the use of so-called "On Screen
Displays" (OSD). This also means that the number of keys on the remote control unit is
reduced.
All functions are displayed on screen, and can be controlled by means of a few control but-
tons.
Functions that are logically related are combined into a "MENU". The selected function will
be highlighted.
The red, yellow, blue and green function keys are indicated by coloured bars at the bottom
of the screen. In the various menus, these coloured bars represent different functions, which
can be implemented by pressing the appropriately coloured keys (multi-function keys) on the
remote control. The function keys are only activated when a brief description is displayed in
the appropriate field.
The button identifications and terms that appear in the OSD menu are shown in bold type
in this operating manual.
Help: Where available, press the blue function key in the menus to display help text and
press again to close the help window.