VACUUBRAND PC 3001 VARIO emission condenser Peltronic - Manual (Page 74)

page 74 of 120
+
Select function ” VACUULAN”.
+
Set ”Set vacuum” to a pressure which can be reached reliably in the
vacuum network. Take account of the ultimate vacuum of the pump
and of the system’s leak rate in case of no vacuum demand.
+
Set ”Switch on” pressure appropriately to ensure sufficient vacuum for
all connected applications.
+
Set ”Delay” if necessary.
+
Start process by pressing ”START/STOP” key.
Vacuum for VACUU•LAN networks