Ambient conditions, Operating conditions, Notice – VACUUBRAND MV 10 NT VARIO User Manual

Page 17

Advertising
background image

page 17 of 126

Allow the equipment to equilibrate to ambient temperature

if you bring it from cold environment into a room prior to

operation. Notice if there is water condensation on cold

surfaces.

Comply with all

applicable and relevant safety require-

ments (regulations and guidelines). Implement the re-

quired actions and adopt suitable safety measures.

Ambient conditions

Do not reach for this product if it has fallen into liquid.

There is a risk of deadly electrical shock. Unplug the

system immediately.

+

Do not use this product in an area where it can fall or

be pulled into water or other liquids.

• Adopt suitable measures in case of differences from

recommended conditions, e.g., using the equipment

outdoors, installation in higher altitudes, conductive

pollution or external condensation on the pump.

• Do not operate this product near flames.

To the best of our knowledge the equipment is in com-

pliance with the requirements of the applicable EC-direc-

tives and harmonized standards (see ”Declaration of Con-

formity”) with regard to design, type and model. Directive

EN 61010-1 gives in detail the conditions under which the

equipment can be operated safely (see also IP degree of

protection, “Technical data”, pg. 26).

Operating conditions

These pumps are not approved for operation in po-

tentially explosive atmospheres.

Do not operate the

pumps in potentially explosive atmospheres.

NOTICE

Advertising
This manual is related to the following products: