VACUUBRAND MD 1C VARIO-SP - Manual (Page 35)

page 35 of 87
Replacing the device fuse (only MD 1C C/US)
➨
Unscrew the fuse holder
at the side of the pump
using a slotted screw
driver.
➨
Replace the defective
fuse by a fuse of the
same type (see „Tech-
nical data“, pg. 25).
Reassemble holder with
fuse to the pump.
➨
Switch off the pump.
➨
Disconnect the electrical power cord before un-
screwing the fuse holder.
Identify and eliminate the cause of failure before switch-
ing on the pump again.