VACUUBRAND MD 1C VARIO-SP - Manual (Page 80)

page 80 of 87
Notes on return to the factory
Repair - return - DAkkS calibration
Safety and health of our staff, laws and regulations regard-
ing the handling of dangerous goods, occupational health
and safety regulations and regulations regarding safe dis-
posal of waste require that for all pumps and other prod-
ucts, the „ Health and safety clearance form“, pg. 83,
must be sent to our office fully completed and signed be-
fore any equipment is shipped to the authorized service
center.
Fax or mail a completed copy of the health and safety
clearance form to us in advance. The declaration must ar-
rive before the equipment. Enclose a second completed
copy with the product. If the equipment is contaminated,
you must notify the carrier.
No repair / DAkkS calibration is possible unless the
correctly completed form is returned. Inevitably, there
will be a delay in processing the equipment if informa-
tion is missing, or if this procedure is not followed.
If the product has come in contact with chemicals, radioac-
tive substances or other substances dangerous to health
or environment, the product must be decontaminated pri-
or to sending it back to the service center.
- Return the product to us disassembled and cleaned
and accompanied by a certificate verifying decontami-
nation or
- Contact an industrial cleaning and decontamination
service directly or
- Authorize us to send the product to an industrial clean-
ing facility at your expense.
To expedite repair and to reduce costs, please enclose a
detailed description of the problem and the product’s op-
erating conditions with every product returned for repair.
NOTICE