VACUUBRAND MD 1C VARIO-SP - Manual (Page 54)

page 54 of 87
Accessories
Vacuum gauge DVR 2 .................................682902
810 - 1 Torr (1080 - 1 mbar)
Vacuum hose (caoutchouc) I.D. 3/8” (10 mm ID) ......................................686002
Silencer for hose nozzle 3/8” (DN 10 mm) ..................................................636588
Attention: Dust-laden gases, deposits and condensed solvent vapor can restrict air
flow out the silencer. The resultant back pressure can lead to damage of pump bear-
ings, diaphragms, and valves. Under those conditions, a silencer must not be used.
In-line valve VV-B 6C, VACUU•BUS, for CVC 3000 ....................................674291
Level sensor for catchpots 0.52 qt (500 ml), VACUU•BUS, .........................699908
for CVC 3000
Solenoid operated valve (C3-B), VACUU•BUS ..........................................636668
for CVC 3000, for assembly at distribution head
Upgrade kit SYNCHRO .............................................................................. 699920
to two inlets (valve block; replaces distribution head)
Modification kit for small flange KF DN 16 ........................................................ 699939
at inlet of distribution head
Hose nozzle for tubing I.D. 1/4” / 3/8” (DN 6/10 mm), ...............................636635
for inlet at distribution head
Elbow piece (90°) for PTFE tubing* ...........................................................637873
for assembly at inlet of distribution head
Blind flange (C1) for assembly at distribution head .....................................677136
Flow control diaphragm valve (C2) ...........................................................677137
for assembly at distribution head
Manometer module (C5) ............................................................................ 677100
for assembly at distribution head
CVC 3000 Vacuum controller ......................683160
100-230 V 50-60 Hz
Upgrade possibilities for MD 1C + AK + EK: