Presetting stations, 2 press the ii button to store the station, Preset number tuning – Aiwa XR-MD95 User Manual
Page 10: 1 press thetuner/band button to select a band, Another method to tune in to a preset station, To clear a preset station, 3 repeat steps 1 and 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PRESETTING STATIONS
The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune in to a preset station directly.
1 Press theTUNER/BAND button to select a band.
Then, press the ◄◄ or ►► button to select a
station.
2 Press the II button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Preset number
PRESET NUMBER TUNING
1 Press theTUNER/BAND button to select a band.
2 Press the numbered buttons on the remote
control to select a preset number.
Example:
To select preset number 15, press the +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
Another method to tune in to a preset station
Press the TUNER/BAND button to select a band.
Then press the ► button on the control panel.
Each time the button is pressed, the station with the next higher
number is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the ■ button, and press the II button within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
II nil
Frequency
3 Repeat steps 1 and 2.
Each band can only store a maximum of 16 preset stations.
1 0
ENGLISH