Aiwa XR-MD95 - Manual (Page 6)

BEFORE OPERATION USING THE CONTROL PANEL
Remote
Sensor
'MD PLAY
►CD PLAY
POWER
PHONES
TUNER/—c
BAND
Turning on the power
Press the POWER button.
Pressing the ► CD PLAY button, the ► MD PLAY button, or
the TUNER/BAND button turns the power on and starts play of
the corresponding source (Direct Play Function).
Furthermore, ejecting the control panel (see the right column)
while the power is off also turns the power on.
After use
Press the POWER button to turn off the power. The display
changes to the clock.
Using the headphones
Connect headphones to the PHONES jack with a stereo mini
plug (o3.5 mm. Vs inch).
No sound is output from the speakers while the headphones are
plugged in.
CONTROL
OPEN/CLOSE
Control panel
To eject the control panel
Press the CONTROL OPEN/CLOSE button when the power is
turned on or off. The control panel will pop out.
To close the control panel, press the button again.
Buttons on the control panel
Buttons and a dial used to edit an MD, and
adjust the volume and sound quality
The buttons and the dial used to record on and edit MDs, and
make adjustments to the volume level and sound quality to suit
your preferences are on the control panel.
The function buttons select the source to be played.
The control buttons allow you to control the playback of a CD/
MD, and tune in to a desired broadcasting station.
NOTE
■ The ► CD PLAY button and the ► MD PLAY button on the
CD player/MD recorder unit immediately starts CD/MD
playback; I.e., pressing the button starts playback regardless
of the source currently selected.
' The VOL/MULTI JOG dial is used to adjust the volume level,
and, together with the SOUND MODE button, adjusts the sound
quality. It is a convenient dial also used for other purposes.
Refer to pages 8, 20, 21 and 22 for details.
6
ENGLISH