Aiwa XR-MD95 - Manual (Page 17)

RECORDING A WHOLE CD
1 Load a recordable MD into the disc drive with the
iabei side up and in the direction of the arrow.
Direction guide
2 Press the CD button on the controi panei.
3 Load the CD to be recorded.
4 Press the CD ► MD button to start recording.
To stop recording before the end of the CD
Press the ■ button. Recording stops, and the contents (TOC)
of the recording are recorded on the MD,
To stop play of the CD, press the ■ button again.
To record on a previously recorded MD
If there is an unrecorded section left on the MD, the new recording
automatically starts from where the previous recording finished.
If you want to start recording from the beginning of a previously
recorded MD, erase the previous recording completely. (See
page 26.)
To change the display during recording
Press the DISPLAY button. With each press of the button, the
display changes in the following order.
r^CD Track number and elapsed time of CD
(Example: CD ITr 2:34)
@ Remaining playback time of CD
(Example: CD -32:37)
Track number and elapsed time of MD
(Example: MD 4Tr 5:12)
-(i) Remaining recordable time of MD
(Example: MD -62:37)
RECORDING FROM A DESIRED TRACK
To start recording from a desired track, select the track using
the ◄◄ and ►► buttons before pressing the CD ► MD button
to start recording.
C5
Z
c5
cc
o
o
u
cc
Q
■ ■ ■■■■■
Recording stops automatically when the music on the CD ends.
When recording stops, "TCC Edit" appears on the display and
the contents (TCC) of the recording are recorded on the MD.
You can close the control panel during recording.
ENGLISH
1 7