Example, Combining two tracks – Aiwa XR-MD95 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

COMBINING TWO TRACKS

You can combine two tracks by erasing the index mark in
between.

Example

To combine the 2nd track and the 3rd track by erasing the index

mark at the beginning of the 3rd track:

1st track 2nd track 3rd track

NOTE

' if both of the tracks are titied, the titie of the iower numbered

track remains, if only one track is titled on the tracks to be
combined, this titie remains.

' You cannot combine a track recorded in monaurai and a track

recorded in stereo.

1

St

track

2nd track

MD EDIT

ENTER

MD

1 Press the MD button on the control panel and

load an MD.

2 Select or play back the latter track of the two

tracks to be combined using the ◄◄ or ►►

button or the numbered buttons on the remote

control.

Example:

To combine the 2nd and 3rd tracks, select or play back the

3rd track.

3 Press the MD EDIT button repeatedly so that

"Combine" is dispiayed.

Example:

When combining the 2nd and 3rd tracks

r.r

4 Within 10 seconds, press the ENTER button.

The two tracks are combined.
The track numbers from this point forward are decreased by

1

.

5 Remove the MD from the unit.

"TOC Edit" is displayed and the data concerning the contents

of the editing are registered.

24

ENGLISH

Advertising