Aiwa XR-MD95 - Manual (Page 16)

;-v. ■ r. •• ■■* •■ V H • "••; *' •: ,-■ ;• ■/•:^ ; • • f; V ’\rr:'r.
..uu,Lj^-!iL w: /¡;ij | V"*- ? V. V% ? V>* ^:r‘r
VARIOUS WAYS OF MD
RECOROING
Recording through digital inputs
Digital recording of CD audio signals to MDs gives recordings
with no degradation in sound quality. You can use any of the
following methods to record from CDs to MDs.
• Record a complete CD onto an MD
• Record a desired track of a CD onto an MD
• Record your favorite CD tracks in any order
Recording through analog inputs
Recording through analog inputs from the tuner or external
equipment connected to the TAPE IN jacks and AUX IN jacks
can be done easily. Recording through analog inputs from a CD
is also possible.
Extended recording
Twice as long as the time printed on the MD can be obtained by
using the monaural recording mode.
uu;
• Nothing other than an MD should be inserted in the disc drive,
otherwise the disc may become scratched, causing a
malfunction.
• Do not give a strong shock or disconnect the AC cord during
recording or a TOC* recording. Doing so may cause the errors
in the TOC recording and the contents cannot be played back.
• TOC : An abbreviation of Table Of Contents
The TOC data functions as a coded index of the recorded
material. The unit records the TOC data such as a playing time
and recorded address on an MD.
ABOUT THE INDEX MARK
You can easily select the desired tracks by registering index
marks during recording.
Choose the appropriate method to register index marks.
AUTO MARK FUNCTION
When recording from a CD using the CD ► WID button
The index mark information recorded on the CD is copied.
CD 2nd track 3rd track 4th track
Recording 2nd track
(MD) I
3rd track 4th track
A i k A
A :lndex mark
The auto mark function is applied in the following cases:
-When recording a whole CD onto an MD (page 17)
-When performing programmed recording of a CD (page 19)
You cannot add the index marks using the time mark function
and manual mark function described below.
When recording CDs or other sources using the MD
REC button
An index mark is registered automatically when a sound signal
is input after a blank section lasting more than 2 seconds.
Blank
Input
sound
Recording
(MD)
:lndex mark
To prevent accidential erasure of recorded material
Slide the record-protect tab as shown below.
Slide the tab so that it is completely locked.
To protect recorded contents
To record
(D
_/
If a recording is attempted when the tab is set to the protected
position, "Protected" appears on the display. Move the protect-
tab to the original position.
V________________________________________________ y
TIME MARK FUNCTION
When recording CDs or other sources using the MD REC button
(pages 20 and 21), you can optionally record index mark
information at an interval of 5 minutes.
This makes it easy to locate recorded radio broadcast material,
etc.
MANUAL MARK FUNCTION
When recording CDs or other sources using the MD REC button
(pages 20 and 21), you can record index mark information
anytime you want by pressing the ENTER button.
1 6
ENGLISH