Aiwa XR-MD95 - Manual (Page 23)

To change a character
Press the ◄◄ or ►► button repeatedly until the oharacter to
be changed flashes. Then enter the desired character again.
To delete characters
Press the ◄◄ or ►► button repeatedly until the character to
be deleted flashes. Then press the II button.
To insert a space between the characters
Press the ◄◄ or button repeatedly until the part to be
entered as a space flashes. Then press the ► button.
To add a character between two characters
First, insert a space between two characters as described above.
Then change the space to the desired character by entering it.
DIVIDING A TRACK
You can divide a track into two tracks by registering an index
mark.
Example
To divide the 5th track into two tracks at 2 minutes 30 seconds:
^ - 2 minutes 30 seconds
4th track 5th frack
o
4th track 5th track 6th track
O
z
5
u
D
’ While "TOC Edit" is displayed, do not disconnect the AC cord
or do not give a strong shock to the unit. If this happens, the
data of TOC will not be reoorded properly and the edited
contents on a disc cannot be played.
•A title cannot be registered in the following cases:
-When a prerecorded disc is inserted ("PB DISC" appears on
the display.)
-When the protect-tab on an inserted disc is moved to the
protected position ("Can't Edit" appears on the display.)
-During random play or programmed play
CHARACTERS THAT CAN BE REGISTERED
Capital letters
□ (spaoe) A B C D E F G H I J K L M N O P Q R
S T U V W X Y Z
Small letters
□ (space) a b c d e f g h i j k i m n o p q r s t u
v w X y z
Numbers and symbols
□ (space) 0 1 2 3 4 5 6 7 8 9 ! " # $ % & ' ( ) * - r
1 Press the MD button on the control panel and
load an MD.
2 During playback, press the II button at the point
where you want to divide the track.
The system enters the playback pause mode.
3 Press the MD EDIT button so that "Divide" is
displayed.
"Divide" is displayed for 10 seconds.
Example:
When dividing the 5th track
i 5. .5 i
4 Within 10 seconds, press the ENTER button.
An index mark is registered and the track number advances
by one.
5 Remove the MD from the unit.
"TCC Edit" is displayed and the data concerning the contents
of the editing are registered.
NOTE
' If the track had a title before the division, the title is assigned to
the first of the two divided tracks.
'A track cannot be divided when an inserted disc already
contains 254 tracks.
ENGLISH
23