Connecting optional equipment, To cancel the sleep timer, Tape in jacks – Aiwa XR-MD95 User Manual
Page 28: Aux in jacks, When connecting a turntable, Line out jacks, Super woofer ^ jack, Sleep 60, Sleep, Setting the sleep timer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING THE SLEEP TIMER
SLEEP
SHIFT-
occc
CD CD cl
CDCDC
bcD
D ^
CD cio
OÌ
0
o 0 O o"l
The unit can be turned off automatically at a specified time.
Use the remote control.
1 Press the SLEEP button while pressing the SHIFT
button on the remote control.
I
àm
OTHER CONNECTIONS
CONNECTING
OPTIONAL
EQUIPMENT
-TAPE IN
-AUX IN
■LINE OUT
-SUPERWOOFER
SLEEP 60
2 Within 4 seconds, press the ◄◄ or ►► button
to specify the time until the power is turned off.
Each time the button is pressed, the time changes between 5
and 240 minutes in 5-minute steps.
SLEEP
ré
....... I....
Specified time
To check the time remaining until the power is turned
off
Press the SLEEP button once while pressing the SHIFT button
on the remote control. The remaining time is displayed for 4
seconds.
To cancel the sleep timer
Press the SLEEP button twice while pressing the SHIFT button
on the remote control so that “SLEEP OFF” is displayed.
Refer to the operating instructions of the connected equipment
for details.
• The connecting cords are not supplied. Obtain the necessary
connecting cords.
• Consult your local Aiwa dealer for optional equipment.
TAPE IN JACKS
This system can input analog sound signals from a tape deck
through these jacks.
Use a cable with RCA phono plugs to connect a tape deck.
NOTE
When using a tape deck to record the sound of this system,
connect the tape deck to the LINE OUT jacks (see below).
AUX IN JACKS
This system can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, VCRs, TV, etc.).
Connect the red plug to the R jack, and the white plug to the L
jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
LINE OUT JACKS
This system can output analog sound signals for all functions
through these jacks.
Use a cable with RCA phono plugs to connect audio equipment.
A ■ "
Do not connect equipment to the LINE CUT jacks and AUX IN
jacks simultaneously.
Ctherwise, noise is generated and malfunctions may occur.
SUPER WOOFER ^ JACK
Connect an optional powered sub woofer with a built-in-amplifier
to the jack.
28
ENGLISH